Thermoplastic material guides
Our technical team wrote these guides to the thermoplastics most often used in injection molding: properties, limitations, processing and typical applications. Use them to get oriented and to compare materials. We then assess the right material for your part together with you, starting from how the part will be used.
- ABSABS (acrylonitrile butadiene styrene): properties and injection moldingABS plastic (acrylonitrile butadiene styrene): properties, pros and cons, chemical resistance, drying, injection molding guidelines and typical applications.Read the guide
- PAPolyamide (PA, nylon): properties and injection moldingPolyamide (PA, nylon) properties for injection molding: PA6 vs PA66, pros and cons, moisture absorption and drying, glass-filled grades and applications.Read the guide
- PA6Polyamide 6 (PA6, nylon 6): properties and injection moldingPA6 (polyamide 6, nylon 6): structure, properties, pros and cons, PA6 vs PA66, drying and injection molding guidelines, and typical applications.Read the guide
- PMMAPMMA (acrylic): properties and injection moldingPMMA (acrylic) properties: clarity, UV and weather resistance, limitations, chemical resistance, drying and practical guidelines for injection molding PMMA.Read the guide
- POKPolyketone (POK): properties and injection moldingPOK is a semi-crystalline aliphatic polyketone with high impact strength, low wear, good chemical resistance and low moisture uptake. Pros, cons and molding.Read the guide
- POMPolyoxymethylene (POM, acetal): properties and injection moldingPOM (acetal, polyoxymethylene): properties, homopolymer vs copolymer, pros and cons, typical applications and practical notes for injection molding.Read the guide
- PPPolypropylene (PP): properties and injection moldingPolypropylene (PP): grades, pros and cons, additives and fillers, injection molding guidelines and typical applications. A technical guide from Bemar Plast.Read the guide
- PPAPolyphthalamide (PPA): properties and injection moldingPolyphthalamide (PPA): what it is, structure, pros and cons, PPA vs PA66 and PPS, drying, mold temperature and injection molding, typical applications.Read the guide
- PPOPolyphenylene oxide (PPO): properties and injection moldingPPO (polyphenylene oxide, also PPE) is an amorphous engineering plastic with low water absorption and heat resistance. Blends, limits, drying and molding.Read the guide
- PPSPPS (polyphenylene sulfide): properties and injection moldingPPS (polyphenylene sulfide): a semi-crystalline engineering plastic with high chemical and heat resistance. Pros, cons, injection molding and applications.Read the guide
- PSPolystyrene (PS): properties and injection moldingPolystyrene (PS): properties, pros and cons, GPPS vs HIPS vs EPS, injection molding guidelines and typical applications. A technical guide from Bemar Plast.Read the guide
- TPEThermoplastic elastomers (TPE): properties and injection moldingThermoplastic elastomers (TPE): TPS, TPO, TPV, TPU, TPC and TPA families, pros and cons, drying, overmolding guidelines and typical applications.Read the guide
How to choose the material
Start from what the part has to do, not from the name of the material. These are the criteria we review with your engineering team.
Service temperature
What matters is the temperature the part sees continuously, not just short peaks. Above the material's limit, the part deforms under load and loses stiffness. Engineering polymers, especially glass-filled grades, withstand higher temperatures than commodity polymers such as PP, PS and ABS.
Mechanical strength and impact resistance
Distinguish between static loads, loads repeated over time and impact, including at low temperatures. Glass fibers increase stiffness and strength, but reduce toughness and make shrinkage differ by flow direction. For parts that must absorb impact, tough materials such as PC, PC/ABS or unfilled PA are good candidates.
Chemical resistance
List everything the part comes into contact with: oils, fuels, cleaning agents, disinfectants, hot water, UV light. Semi-crystalline materials such as PA, POM, PBT and PP generally resist oils and solvents better. Amorphous materials such as PC, ABS and PMMA can crack under stress when exposed to certain chemicals (environmental stress cracking).
Appearance and transparency
Transparent parts require amorphous materials such as PMMA, PC or PS. On visible parts, color, gloss and surface finish also matter, and they depend on both the material and the mold. With glass-filled materials, fibers can show at the surface and make the finish less uniform.
Dimensional stability and moisture absorption
Amorphous materials have low, uniform shrinkage; semi-crystalline materials shrink more, and this has to be built into the mold design. PA absorbs moisture from the air, so both its dimensions and its mechanical properties change over time. For tight-tolerance parts, POM or PBT, which absorb little moisture, are often the first options to consider.
Cost and volumes
Part cost depends on the price of the material, but also on part weight, cycle time and processing steps such as drying. An over-specified material adds cost to every part you order, and at high volumes the difference becomes significant. That is why we look for the material that meets the specification, not the one with the highest performance.
Frequently asked questions
What is the difference between engineering polymers and commodity polymers?
Engineering polymers, also called engineering plastics, offer higher mechanical strength, heat resistance and dimensional stability than commodity polymers, at a higher material cost. Engineering polymers include PA (nylon), POM (acetal), PBT, PC and PPA; commodity polymers include PP, PS and ABS. The former are used for technical and structural parts, the latter for less demanding parts or where cost matters most.
Which materials do you mold most often?
We mainly mold engineering polymers: PA6, PA66, glass-filled PA, POM, PBT, PC, PC/ABS and PPA. Among commodity polymers, we mold PP, ABS, PS, PMMA and TPE. We assess other materials on request, together with your engineering team.
What are hygroscopic materials and why do they need drying?
Hygroscopic materials, such as PA, PC, PBT and PPA, absorb moisture from the air and must be dried to the residual moisture level specified by the resin supplier before molding. If they enter the press wet, they can cause splay (silver streaks), bubbles and a loss of mechanical properties, even when the part looks fine. In our plant, each of the 13 molding lines has its own dehumidifying dryer, with molecular sieve desiccant.
How do you choose between nylon (PA) and acetal (POM)?
Choose POM when you need dimensional stability and low friction, and PA when you need more toughness and, especially in glass-filled grades, higher heat resistance. POM absorbs little moisture and holds tight tolerances, which is why it is common in gears, clips and precision mechanisms. PA absorbs moisture, which makes it tougher but changes its dimensions and stiffness; glass-filled PA suits structural parts. POM has limited resistance to strong acids and, without UV stabilization, is not suited to prolonged outdoor exposure.
Who chooses the material for my part?
The final choice is yours, usually made by your engineering team, which knows the product's specifications and operating conditions. We assess the material from a molding standpoint: shrinkage, wall thickness, gate locations, drying and how it behaves in the mold. If a material causes production issues or costs more than needed, we suggest alternatives to validate together.
Can I switch materials and keep the same mold?
Sometimes, but only if the new material has shrinkage similar to the material the mold was designed for. With different shrinkage, part dimensions change and the mold may need modifications. Switching to a glass-filled material also needs careful review, because it increases mold wear.
Send us your drawing, and we will tell you how to mold it
We reply with a technical assessment and a quote. To prepare them, we need three pieces of information about your component.
-
The part
The 2D drawing or 3D model of the component.
- STEP
- IGES
-
Material and annual volume
The required material, or the part's operating conditions if the material has yet to be chosen. Then the approximate annual volume.
-
Cosmetic requirements and tolerances
Visible surfaces, color and finish, and the critical tolerances to be met.
If you do not have all the data yet, write to us anyway: we will define it together.
- Phone
- +39 045 6550855
- info@bemarplast.com
- Hours
- Monday–Friday, 8 a.m.–6 p.m. Italian time (2 a.m.–noon ET)